According to the Environmental Impact Assessment Law of the people's Republic of China, the Interim Measures for public participation in environmental impact assessment (HF [2006] No. 28), the administrative provisions for public participation in environmental impact assessment of construction projects in Xinjiang Uygur Autonomous Region (Trial Implementation) (Xin Huan Ping Fa [2013] No. 488) and the notice on printing and distributing the information disclosure mechanism scheme for environmental impact assessment of construction projects The construction unit is the main body of environmental information disclosure in the whole process of site selection, construction and operation of construction projects, as well as the main body of information disclosure related to the environmental impact report (form) of construction projects and the implementation of environmental protection measures after approval; in the process of public participation in the preparation of environmental impact report, the construction unit should Information on environmental impact assessment should be made public to solicit public opinions. The construction unit shall be fully responsible for the contents of the public information and bear the legal responsibility.

Entrusted by Xinjiang yibeisen New Material Technology Co., Ltd., Beijing Zhonghuan Bohong Environmental Resources Technology Co., Ltd. undertook the environmental impact assessment of 150000 T / a unsaturated polyester resin and 50000 T / a phthalic anhydride project of Xinjiang yibeisen New Material Technology Co., Ltd. According to the Environmental Impact Assessment Law of the people's Republic of China, Interim Measures for public participation in environmental impact assessment (HF [2006] No. 28), technical guidelines for environmental impact assessment - public participation (Exposure Draft), and administrative provisions for public participation in environmental impact assessment of construction projects in Xinjiang Uygur Autonomous region (Trial Implementation) (Xin Huan Ping Ping Fa [2013] No. 488), the environmental impact assessment of construction projects in Xinjiang Uygur Autonomous Region has been implemented According to relevant regulations, the public participation in the project is publicized for the second time to solicit public opinions and suggestions on environmental protection of the project. The publicity materials are as follows:

1、 Overview of construction project

Project Name: 150000 T / a unsaturated polyester resin and 50000 T / a phthalic anhydride project of Xinjiang yibeisen New Material Technology Co., Ltd

Nature of Construction: New

Construction unit: Xinjiang yibeisen New Material Technology Co., Ltd

Construction site: it is located in the south area of Kuitun Dushanzi economic and Technological Development Zone in Xinjiang, adjacent to Guiyang road in the South and about 1.2km away from Huaqiang road in the West.

Project content: build a new production line of phthalic anhydride with an annual output of 50000 tons / year and a production line of unsaturated polyester resin with an annual output of 150000 tons / year, and build supporting facilities such as office complex building, warehouse, heat exchange device, incinerator and environmental protection facilities.

Total investment: 374.6254 million yuan.

2、 Overview of the possible impact of construction projects on the environment

1. Atmospheric environmental impact

The organic tail gas from the phthalic anhydride unit is collected and treated in the supporting catalytic oxidation unit, and then discharged up to the standard. The dust produced in the flake packing of phthalic anhydride finished products is discharged through the air exhauster with a height of not less than 15m after bag dedusting.

The organic waste gas from the unsaturated polyester resin plant is sent to the supporting incinerator for treatment and then discharged up to the standard. The powder dust escaping from the feeding port of the reactor is collected and treated by water film dedusting, and then discharged through the exhaust funnel with a height of not less than 15m.

The ethanol waste gas generated in the process of barrel washing is treated by gas collecting hood and activated carbon adsorption tower, and then discharged up to the standard.

The unorganized emission source of this project is mainly the large and small breathing gas produced by the raw material storage tank. In the process of material transportation, double tube material transportation is adopted, which can effectively avoid the generation of large breathing. Nitrogen seal is used for all storage tanks, steam tracing is adopted in winter, and circulating water spraying is adopted in summer to reduce daily temperature difference, which can effectively reduce the occurrence of small respiration.

After the waste gas of the project is treated and discharged up to the standard by corresponding measures, it has little impact on the ambient air quality.

2. Water environmental impact

The waste water of this project mainly includes organic waste water from unsaturated polyester resin plant, waste liquid from barrel washing and plant cleaning water. The production waste water of this project will be incinerated in the supporting incinerator and will not be discharged. The clean water and domestic sewage of the project are directly discharged into the pipe network of the park. The project wastewater is treated and disposed reasonably, which has little impact on the surrounding water environment.

3. Acoustic environmental impact

The main noise sources of the project are steam turbine, air compressor, pump, laminating machine, blower, etc. measures such as vibration reduction and noise elimination are taken for the main noise sources. Due to the silent environmental sensitive points nearby, there is little impact on the surrounding acoustic environment.

4. Environmental impact of solid waste

The waste catalyst of this project will be recovered by the catalyst manufacturer; the waste heat conducting oil, rectification residue produced at the bottom of phthalic anhydride rectification tower, unsaturated resin filtration residue, etc. will be collected and sent to a qualified disposal unit for disposal. Domestic waste is regularly cleared and transported by the park sanitation department. The solid waste generated in the whole plant area is disposed reasonably, which has less impact on the surrounding environment.

5. Environmental risk

The project strictly implements the relevant requirements and specifications in the design, construction, acceptance, daily operation management and other aspects, and will formulate strict management system and standardized operation procedures and procedures, so as to control the environmental risk level at an acceptable level.

3、 Countermeasures and measures to prevent or reduce adverse effects

1. Air pollution control measures

Natural gas is used as fuel in the heat transfer oil furnace of the project, and low nitrogen burner is used to reduce the emission of main pollutants; the organic tail gas from the phthalic anhydride plant is collected and treated in the supporting catalytic oxidation unit, and then discharged up to the standard. The dust generated from the flake packaging of phthalic anhydride products is discharged through the exhaust funnel with a height of not less than 15m after bag dedusting treatment; the organic waste gas from the unsaturated polyester resin plant is sent to the supporting incinerator for treatment before reaching the standard for discharge; the fugitive powder dust from the feeding port of the reactor is collected and then discharged through the exhaust funnel with a height of not less than 15m after water film dedusting treatment; the ethanol waste gas generated in the process of barrel washing is collected by gas collecting hood and activated carbon After treatment by carbon adsorption tower, it can meet the discharge standard.

The unorganized emission source of this project is mainly the large and small breathing gas produced by the raw material storage tank. In the process of material transportation, double tube material transportation is adopted, which can effectively avoid the generation of large breathing. Nitrogen seal is used for all storage tanks, steam tracing is adopted in winter, and circulating water spraying is adopted in summer to reduce daily temperature difference, which can effectively reduce the occurrence of small respiration.

2. Water pollution control measures

The waste water of this project mainly includes organic waste water from unsaturated polyester resin plant, waste liquid from barrel washing and plant cleaning water. The production waste water of this project is incinerated in the supporting incinerator and will not be discharged. The clean water and domestic sewage of the project are directly discharged into the pipe network of the park.

The ground of chemical loading and unloading area, main plant area and storage tank area of the project are treated with anti-seepage, anti-corrosion and hardening treatment, and cofferdams and accident pools are set up.

3. Noise pollution control measures

Low noise equipment should be selected as far as possible, and manufacturers should take noise reduction measures to control the noise within the allowable range; targeted measures should be taken for different high noise equipment. For strong noise equipment, sound absorption and noise elimination materials shall be installed. In order to reduce the air flow noise, a muffler is installed in the air passage.

4. Prevention and control measures of solid waste pollution

Domestic waste is entrusted to the environmental sanitation department for unified clearing and transportation. Waste catalyst and waste molten salt are recovered by the manufacturer; waste liquid, distillation residue, waste heat conducting oil and filter residue from naphthalene refining process are sent to qualified hazardous waste disposal unit for treatment. The waste liquid produced in the barrel washing workshop is sent to the incinerator of the resin workshop for incineration.

5. Environmental risk prevention measures

The project involves a variety of flammable and toxic chemicals. In terms of chemical storage and hazardous waste disposal, the regulations on safety management of hazardous chemicals and standards for pollution control of hazardous waste storage are strictly followed. The ground of main plant area is subject to anti-seepage hardening, and the raw material storage tank area is subject to anti-seepage hardening cofferdam and anti-seepage accident pool according to relevant specifications. The enterprise formulates strict regulations The accident risk prevention measures and emergency plan should be strictly implemented, so as to minimize the accident probability, minimize the loss caused by the accident, and control the impact within the acceptable range.

4、 Key points of environmental impact assessment conclusions in environmental impact report

This project belongs to the national industrial policy encouragement project. During the construction and operation of the project, it will have a certain adverse impact on the surrounding environment, and there are certain environmental risks in the future construction and operation, but the impact and environmental risks are acceptable. The construction unit should seriously implement the pollution control measures, risk prevention measures and ecological environment protection measures proposed in the EIA report, so as to minimize the adverse impact of the project on the environment. Therefore, this report believes that the construction of the project is feasible in terms of environmental protection.

5、 Public participation procedures and programs

1. The purpose of public participation

The purpose of public participation is to safeguard the legitimate environmental rights and interests of the public, embody the people-oriented principle in environmental impact assessment, more comprehensively understand the environmental background information, find potential environmental problems, improve the scientificity and pertinence of environmental impact assessment, and improve the rationality and effectiveness of environmental protection measures through public participation.

2. Implement the arrangement of personnel, funds and other auxiliary conditions for public participation

The questionnaire survey was compiled by our company, and the scope of public participation in the survey was determined in accordance with the requirements of "Regulations on public participation in environmental impact assessment of construction projects in Xinjiang Uygur Autonomous Region (Trial)". The survey process was carried out by the construction unit.

3. Work schedule

The project will be launched on the website of Kuitun municipal government from March 15, 2018 to March 30, 2018（ http://www.kuitun.gov.cn ）The first online announcement was published on the Internet. On April 3, 2018, at the eco environmental protection industry association of Xinjiang Uygur Autonomous Region (http:// www.xjhbcy.cn/ ）The website publicizes the environmental impact information of the project to the public for the second time.

At the end of this network publicity, the distribution, collection and statistics of on-site Public Participation Questionnaire were carried out. The planned survey time is 3 working days, and the statistical analysis time is 2 working days.

4. Geographical and quantitative distribution of the public

The project is located in the Southern District of Kuitun Dushanzi economic and Technological Development Zone, Xinjiang. The questionnaire survey objects are representative and random. The residents around the project area and the staff of nearby units or those who care about the project construction are selected.

5. Selection method, number or list of representatives of the public

The space scope of public participation in the investigation shall not be less than the scope of environmental impact assessment (considering the maximum impact scope of each environmental element), covering all sensitive protection targets of the project. The objects of soliciting opinions include representatives of units and the public who may be directly affected by the construction project, as well as representatives of grassroots organizations and relevant experts in the project location and affected areas. The number of questionnaires to be distributed is 500.

6. Ways of information disclosure

The evaluation information publicity is carried out by means of network publicity, and the second information publicity is carried out on the website of the ecological environment protection industry association of Xinjiang Uygur Autonomous Region. After the relevant information is publicized, the public can consult the EIA unit and the construction unit for the report, or consult the EIA unit and the construction unit for the report by e-mail or letter.

7. Ways of public opinion survey

The public participation questionnaire was distributed on site.

8. The arrangement of information feedback, etc

Public participation in information disclosure the basic situation of the project and the environmental problems existing in the project were disclosed to the public. During the process of information disclosure and public opinion investigation, the contact information of the project owner and EIA unit was clearly disclosed. The project construction unit and EIA unit shall set up full-time personnel to collect and sort out public feedback.

The construction unit will truthfully record and summarize the public opinions and suggestions in the public participation booklet, adopt reasonable public opinions and suggestions, and feed back to the EIA unit, design unit and relevant departments of the project. The adoption or non adoption of public opinions will be explained one by one, and the explanation of the adoption or non adoption of relevant units, experts and the public opinions will be attached in the public participation booklet.